Two-layer management type industrial switch

Home >  Products >  Industrial Switches >  Two-layer management type industrial switch

All Categorys

Routers
Embedded Router Modules
Industrial Switches
Network Bridge

All Small Categorys

Routers
Embedded Router Modules
Industrial Switches
Network Bridge

(LBT1612GS-M-SFP) 16-port 10//100/1000Mbps SFP+8-port RJ45+4G combo Managed Industrial Switch

LBT1612GS-M-SFP, an hardened 32-port Industrial Ethernet Switch, provides non-blocking wire-speed performance in harsh industrial environment. It also provides 16-port 10/100/1000Mbps SFP + 8-Port RJ45+4G combo delivered in an IP50 rugged, strong case with redundant power system. Its slim case is suitable for such applications as surveillance system deployments, control management, and wireless service in climatically demanding environments with wide temperature range from -40℃ to 80℃.

  • Description
  • Parameters
  • Applicationg
Is there a problem?<br>Please contact us to serve you!

Is there a problem?
Please contact us to serve you!

Inquiry

The LBT1612GS-M-SFP provides the flexibility to all kinds of 10/100/1000Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.

The LBT1612GS-M-SFP is packaged in a compact IP40 case that allows bracket mounting to cabinet. It supplies dual power supply: DC36~72V and AC110-240V.

Interface
•   16-port 10/100/1000Mbps SFP
•   8-port 10/100/1000Mbps RJ45
•   4G combo

Industrialconformance
•   Dual power supply: DC36-72 and AC110-240V
•   - 40℃  to 80℃  operating temperature
•   Supports 6KV DC Ethernet ESD protection
•   Supports 6KV DC EFT protection for power line
•   Free Fall, Shock and Vibration Stability
•   Bracket mounted

specifications:

 

Model No.

LBT1612GS-M-SFP

1000Base-FX Port

16 port SFP

1000Base-TX Port

8 port RJ-45 auto-MDI / MDI-X

4G combo (either 4G SFP or 4G RJ45)

 

 

Performance Specification

Bandwidth (switch capacity): 256G

Packet Buffer Memory: 16Mbit

Packet Forwarding Rate: 131Mpps

MAC Address Table: 16K

Installation

Bracket mounting

Maximum Frame Size

10240bytes packet size

Flow Control

Back pressure for half duplex, IEEE 802.3x pause frame for full duplex

Enclosure

IP50 Aluminum housing

 

 

LED Indicator

Power: Red

Fiber: Link 2(Green)

 

Ethernet: Yellow

Dual Power Input

36 to 72V DC; AC110-240V

Power Consumption

< 45W

Surge protection

± 4KV

 

 

Network Protocols

IEEE802.3 10BASE-T;

 

IEEE802.3i 10Base-T;

IEEE802.3u;100Base-TX/FX; IEEE802.3ab 1000Base-T;     IEEE802.3z 1000Base-X;

IEEE802.3x;

Network cables

10BASE-T: Cat3,4,5 UTP(≤100 meter)

100BASE-TX: Cat5 or later UTP(≤100 meter)   1000BASE-TX: Cat6 or later UTP(≤100 meter)

 

 

 

 

 

Industry Standard

FCC CFR47 Part 15,EN55032 Class A

IEC61000-4-2 (ESD): ±8kV (contact), ±12kV (air) IEC61000-4-3 (RS): 10V/m (80~ 1000MHz)

IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV

IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV

IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)

IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s)

MTBF

300,000hours

Dimensions (W x D x H)

442×325×44 mm

Weight

Product Weight: 3.26KG

Packing Weight: 4KG

 

Working Environment

Working temperature: -4080;

Storage temperature: -4080

Relative Humidity: 5%~95 %( no condensation)

software:

 

Port Features

IEEE 802.3x Flow control

Interface counters

Storm Control

 

 

 

Link Aggregation

Static Aggregation

Dynamic Aggregation, LACP

 

Supports up to 8 aggregation groups, each group up to 8 ports

Support source MAC, destination MAC, source destination MAC, source IP, destination IP, source destination IP routing strategy

MAC Table Management

Support

Forwarding mode

Support IVL forwarding mode

Static MAC Address

Support

MAC Address Binding

Support

MAC Address Filtering

Support

Mirror

Port-based Mirror

 

Spanning Tree

IEEE802.1d STP

IEEE802.1w RSTP

IEEE802.1s MSTP

  

ERPS (G.8032)

Single Ring, Sub-Ring, Multi-Ring

Load balance

Recovery Time < 50ms

GVRP

Supported

QINQ

VLAN-based QinQ

 

LLDP

LLDP

LLDP-MED

Loop Protection

Supported

 

VLAN

4094 VLAN

Port-based VLAN

GVRP

 

Protocol VLAN

MAC-based VLAN

IP Subnet-based VLAN

 

Voice VLAN

Static entry

LLDP-MED

Port Isolate

Support

 

 

 

 

IGMP

Snooping IGMP V1 Snooping

IGMP V2 Snooping

IGMP V3 Snooping

Source Port Check

IGMP Fast Leave

IGMP Filter

 

 

 

MLD Snooping

MLD V1 Snooping

MLD V2 Snooping

Source Port Check

MLD Fast Leave

MLD Filter

Security

 

 

 

 

ACL

ACL (IP Standard ACL), IPv4/IPv6

MAC extend ACL

IP extend ACL

L2, L3, L4 fields match

log, redirection, mirroring, speed limit

 

 

 

 

QoS

QoS Class, Remarking

SP, WRR queue scheduling

Ingress port-based rate-limit

Ingress priority-based rate-limit

Egress port-based rate-limit

Egress queue-based rate-limit

 

Policy-based QoS

Storm Control

8 queues per port

 

Dot1x

Port Access Control

User Access Control

MAC-address Access Control

 

 

AAA

Support 802. 1x

Support RADIUS

Supports authentication, authorization, and accounting through RADIUS server

Management

 

User management

Password protection

SNMP

SNMP V1/V2c/V3

 

 

RMON

Statistics Group

History Group

Alarm Group

Events Group

Web management

HTTP V1.1, HTTPS

Firmware Upgrade

Reversion Upgrade

IPv4/IPv6

Support

CLI

Support

Syslog/Debug

Support

 

Diagnosis

Ping (IPv4), ping (IPv6)

Trace route(IPv4)

Trace route(IPv6)

Management

 

NTP

NTP Client

DHCP

DHCPv4 Client, DHCPv6 Client

 

DHCP Snooping

DHCP snooping table

Trust Port

IPv6 DHCP-Guard

Support

Telnet

Telnet Server

TFTP

TFTP Client

SSH

SSH Server

Dimensions

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

If you have any suggestions, please contact us

CONTACT US
Committed to making the best products

Copyright © 2024 Shenzhen Libtor Technology Co., Ltd.  -  Privacy policy
粤ICP备11103969号