Home > Products > Routers > Industrial Router > 4G Industrial Route
Industrial 4G wireless router is mainly used in data transmission business of industry , transparent data transmission, image transmission, equipment monitoring and wireless routing
Internet access. Expanded applications include: GPS, etc.
The uses an embedded high-performance CPU to effortlessly handle routing, single
The SIM card is designed to process protocols and large amounts of
data at high speed and stability, and can be matched with a variety
of 4G industrial modules (WCDMA/EVDO/TD-SCDMA/TDD/FDD-LTE networks).
Provide 10/100m Ethernet port, WIFI wireless interface, serial port,
IO port and many other interfaces. Support WEB configuration mode,
convenient and simple management, and support remote cloud control.
Side A
1. WAN-LAN4: RJ45 interface The WAN can only be used as a WAN port in standard router mode.
2. DC power interface/terminal power supply: 2.1mm round head power interface, positive inside and negative outside, voltage input:
7-35 V. Input power greater than 10 W is recommended.
3. RS232/RS485 serial interface: 4 Pin terminal female Edg 3.5mm.
4. GPIO interface: support 2-channel analog input/control output with hotoelectric isolation (additional customization is required)
Side B
1. Indicator light
WiFi light: It is always on after being powered on, and flashes when WiFi is working normally. SYS lamp: it is always on after
power on, and it flashes slowly when the system is started
normally. Flash when the reset key is pressed. LINK light: In 4G or WIFI bridging mode, it flashes when dialing (bridging AP), and it
is always on after successful networking. VPN light: always on when using VPN;
2. R (reset) key: press this key for 5 seconds in the power-on state, the SYS light will flash, and then restart, and the reset is
successful.
3. SIM card slot: snap-in SIM card holder. If you need to take out the SIM card, gently push the SIM card.
Software function
|
The way to surf the Internet |
4G dial-up DHCP/Static IP/PPPoE |
|
|
Number of users supported |
Wired: 253, Wireless: 30 |
|
|
Operating system requirements |
Windows XP/VISTA Linux 2.6 Windows 7 and above MAC OS: 10.3.7 and above |
|
|
Browser requirements |
IE: 6.0 and above Safari: 1.2.4 and above Firefox: 2.0.0.8 and above |
|
|
Security management |
Set up a firewall to prevent malicious attacks from the Internet on computers in the LAN. MAC filtering: prohibit MAC addresses that have been added. Access control: Control the access of computers in the LAN to the Internet. Port blocking: Block certain viruses from continuously initiating connections through a certain port to prevent Dos attacks |
|
|
System Services |
Virtual server: Set an internal server for Internet users to access DMZ: When the open port of the virtual server to be set is uncertain, it can be set as a DMZ host Port triggering: The wireless router can automatically open the inward service port according to the port of the LAN accessing the Internet. Serial port service: realize serial port data transmission, AT command control and other functions |
|
|
Equipment management |
Locale Software upgrade NTP server settings Remote management Back up system setup information Restart Recover Settings Information from File Change the password and restore to the factory settings |
|
|
WLAN security mode |
Open System WPA-PSK WPA2- PSK WPAPSK |
WPA2PSK (ie WPA-PSK and WPA2-PSK mixed mode) WPA1WPA2 (i.e. WPA and WPA2 mixed mode) |
Hardware parameters
|
Wireless interface |
IEEE802.11b/g/n |
|
|
Operating frequency band |
2400-2483.5MHz |
|
|
Antenna |
SMA external rotation and internal hole |
|
|
WIFI transmission rate |
300Mbps（ MAX） |
|
|
External interface |
LAN port: 5 (LAN0 is WAN/LAN adaptive) RS232/485 interface: 1 SIM card slot: 1 |
Antenna interface: 1-5 (optional) Indicator light: 4 DC power supply interface: 1 Reset key: 1 |
|
WIFI data |
802.11n: -66dBm at 300Mbps/HT40 MCS7 :+15.5dBm 802.11b: -86dBm at 11Mbps/CCK: +18 dBm 802.11g: -73dBm at 54Mbps/OFDM: +15.5dBm |
|
|
Frequency band supported (optional) |
GN (Domestic-Default): FDD-LTE B1/3/5/8 TDD-LTE B38/39/40/41 Europe FDD-LTE B1/3/5/7/8/20 TDD-LTE B38/39/40/41 North America (NA) FDD-LTE B2/3/4/5/7/8/12/13/17/25/26/66 TDD-LTE B41 Global FDD-LTE B1/2/3/4/5/7/8/17/20/28 TDD-LTE B38/39/40/41 |
|
|
Main frequency of storage memory |
Store 8 MB Main frequency: 580MHz Memory 64MB |
|
|
Overall dimensions |
Length, width and height: 149 * 126 * 46mm (optional fixing piece/guide rail installation) |
|
|
Power source |
DC power supply: 7-35V/3A |
|
|
Power consumption (current) |
Less than 400mA |
|
|
Work environment |
Operating temperature: -40。C~+80。C Storage temperature:-50。C~+90。C Humidity:5%~95%, non-condensing |
|
The product images, videos, and screen content on the above pages are for illustration only. The actual product effect (including but not limited to appearance, color, size) and screen display content (including but not limited to background, UI, graphics,videos) may have slight differences. Please refer to the actual product.
The data on the above page are theoretical values, all from internal laboratories. In actual use, there maybe slight differences due to individual differences in products, software versions, usage conditions, and environmental factors. Please refer to the actual use situation.
Due to the real-time changes in product batches and production supply factors, in order to provide as accurate product information, specification parameters, and product characteristics as possible, we may adjust and revise the text and image effects on the above pages in realtime to match the actual product performance, specifications, indices, components, and other information. If it is necessary to make the above modifications and adjustments, no special notice will be given.
The manufacturer strives to ensure the accuracy of the information provided, but does not assume responsibility for any possible errors or omissions。
Copyright © 2024 Shenzhen Libtor Technology Co., Ltd.
-
Privacy policy
粤ICP备11103969号
