N540 is a high-performance enterprise-level outdoor network bridge product that works in the 5G frequency band and supports 802.11ac technology. The unique digital tube pairing technology does not require computer configuration, and can easily complete the pairing of point-to-point and point-to multipoint (within 8 points) devices. 100Mbps network interface, 5G 802.11ac wireless processing speed up to 450Mbps. The power supply method is flexible and supports 24V PoE network cable power supply and 12V 1A DC local power supply. The network cable power supply distance can reach 50-70 meters (depending on the network cable material). It adopts an outdoor IP65 windproof, rainproof, dustproof, and sunproof protection grade shell design to easily adapt to various harsh outdoor environments. Built-in 14dBi high-gain, wide-angle directional plate antenna, easy and quick to install. It has the characteristics of high performance, high gain, high receiving sensitivity, high bandwidth, etc., which greatly enhances the wireless transmission performance and stability, and is widely used in medium and short distance video transmission and data transmission.
Hardware product features
Ultra cost-effective hardware configuration
Enterprise-level main control chip, industrial-level circuit design, supports IEEE802.11a/n/ac protocol, can provide 450Mbps wireless access speed and 10/100Mbps Ethernet switching processing speed. The excellent high and low temperature resistance design fully guarantees the real-time, long-term, stable and efficient transmission of user network data in extreme environments, improving user experience.
Powerful wireless transmission capabilities
The circuit design of high power and high receiving sensitivity, combined with a high-gain directional plate antenna, greatly enhances the wireless transmission distance and improves the performance and stability of wireless transmission.
Pairing is simple and efficient
No network expertise or computer operation is required. Simply dial the code and adjust the digital tubes of the master and slave devices to the same value to complete point-to-point and point-to-multipoint (within 8 points) pairing work.
Flexible power supply
The equipment not only supports PoE remote network cable power supply, but also supports 12V 1A DC local connection power supply to meet the needs of various scenarios, reduce construction costs, and flexibly select power supply methods.
Fashionable, compact, simple and convenient to install
The appearance is fashionable and compact, and the installation method is flexible and simple. It has wall-mounted and pole-fixed installation methods, which greatly reduces the construction difficulty for construction workers and improves construction efficiency without affecting the original design.
Software features
Clear device overview at a glance
Log in to the device with a WEB browser to view the system status, bridge status, and interface status information in real time. The simple and clear interface allows users to know the working status of the device in real time.
Fool-like quick setup & powerful wireless optimization
Users do not need to know too much about wireless knowledge or too much professional knowledge. They can pair point-to-point and point-to-multipoint (within 8 points) devices in a few simple steps. Wireless optimization can be completed with simple settings, easily improving link transmission quality and usage effects.
Ensure users’ network security at all times
The device bridge signals all adopt advanced WPA-PSK & WPA2-PSK encryption strategies. The bridge signals are hidden by default to protect the user's network from hacker attacks at all times and ensure the user's data security.
Simple and efficient system configuration function
Access password modification, factory configuration restoration, local upgrade, simple and clear functions allow you to easily complete the system settings of the device and improve the robustness of the device.
Product parameters
|
|
Hardware configuration
|
|
model
|
N540 |
Main chip
|
MTK7628KN+7610E 450Mbps High-performance enterprise-grade chips
|
Main frequency
|
580MHz MIPS® 24KEc™CPU |
wireless technology
|
5G:450M 802.11a/n/ac 1T1Rtechnology |
|
Memory |
1MB DDR RAM |
|
Flash |
8MB |
button/switch
|
1*Digital switch/reset button, short press the digital tube to display the value plus one, press and hold for 5 seconds to restore factory settings
Master-slave DIP switch: master is access point mode, slave is client mode
|
indicator light
|
Signal SIG indicator light, ETH network interface status indicator light, power indicator light, system indicator light, digital tube indicator light
|
power supply
|
24V 1A non-standard PoE power supply;
DC 12V 1A, power consumption﹤10W
|
working environment
|
Temperature: -30℃～+55℃ (working), -40℃～+70℃ (storage)
Humidity (non-condensing): 10% ~ 90% (working), 5% ~ 95% (storage)
|
Product size
|
285mm*98mm*98mm |
Product weight
|
N/A |
Antenna
|
Built-in high-gain 14dBi directional plate antenna (horizontal wave half angle 60°, vertical wave half angle 15°)
|
RF characteristics
|
|
frequency range
|
ISM band: 4.900GHz ~ 5.850GHz
|
Channel distribution
|
5G：36、40、44、48、52、56、60、64、100、104、108、112、116、120、124、128、132、136、140、149、153、157、161、165 |
Modulation method
|
OFDM = BPSK,QPSK,16-QAM,64-QAM,256-QAM;DSSS = DBPSK,DQPSK,CCK |
Output power
|
11a @54M:20±2dB, @6M:23±2Db 11n 20MHz：@MCS9:20±2dB, @MCS0:23±2dB 11n 40MHz：@MCS9:20±2dB, @MCS0:23±2dB 11ac 40MHz @MCS9:20±2dB, @MCS0:23±2dB 11ac 80MHz @MCS9:20±2dB, @MCS0:23±2Db |
Receive sensitivity
|
11a: ＜-72dbm@54Mbps, ＜-89dbm@6Mbps 11n 20MHz: ＜-71dbm@MCS8, ＜-89dbm@MCS0 11ac 40MHz：＜-66dbm@MCS9, ＜-84dbm@MCS0 11ac 80MHz: ＜-63dBm@MCS9 ＜-81dBm@MCS0 |
|
EVM |
802.11n: ≤-28 dB 802.11a: ≤-25 dB |
Frequency deviation
|
＜±20ppm |
Software features
|
|
working mode
|
Main AP (bridge access point), slave AP (bridge client), converted by DIP switch
|
Networking method
|
Point-to-point, point-to-multipoint (within 8 points)
|
management style
|
Chinese WEB remote management
|
Bridge configuration
|
Wireless mode: bridge access point, bridge client switching
Bridge access point:
Bridge SSID, encryption method (WPA2-PSK, WPA-PSK, no encryption), bridge password, wireless protocol,
Wireless bandwidth, wireless channel, wireless power (100%, 75%, 50%, 25%, 10%, 5%)
Bridge client:
Bridge SSID, encryption method (WPA2-PSK, WPA-PSK, no encryption), bridge password,
Peer MAC address lock, wireless channel, wireless power (100%, 75%, 50%, 25%, 10%, 5%)
|
network
|
Static IP/dynamic acquisition
|
system
|
Login password modification, factory reset, local upgrade
|
