Home > Products > Routers > Industrial Router > 5GIndustrial Route
1. Dual high performance industrial 4/5G communication modules (optional single mode and dual mode) and 1800m WiFi 6 wireless chip
2. Support 5G-Sub6 (SA/NSA), 4G (FDD-LTE/TDD-LTE), 3G (WCDMA);
3. Supports IEEE802.11b/G/n/AC/ax protocols with a maximum transmission rate of 1774Mbps;
4. Metal casing, protection grade IP30;
5. Standard five gigabit adaptive RJ45 (Ethernet) interfaces with built-in lightning protection 300 0 V (customizable);
6. Wide voltage and current input: DC7-35V/3A, anti-reverse connection, EHV automatic power-off protection;
7. Software and hardware watchdog anti-crash design, after the router is disconnected from the network, it will automatically restart after power failure to protect the stable and reliable operation of the equipment.;
8. Automatic detection of network disconnection, automatic restart of dialing failure, customized restart and other functions;
9. It supports the functions of MQT T and serial port transmission, and can enter the command control mode through the serial port. Thecontrols the router and accessory devices;
10. Supports more than 2 5 DDNS providers;
11. Internal network penetration: port forwarding, DMZ;
12. Supports Pptp/L 2tpVPN Client, Ipsec/OpenVPN Client, Ipsec/OpenVPN Sever;
13. Optional GNSS positioning module, supporting RTK technology, supporting multiple satellite systems (GPS, GLONASS, Beidou, WA AS, EGNOS, MSAS, GAGAN, hybrid engine);
14. Support cloud device management platform and physical network device platform management;
15. Support personalized software customizatio;
| Network | |
| The way to surf the Internet |
4/5G dialing(automaticAPN,settable),DHCP/STATIC/PPPOE dialing,WIFI relay |
| Network Protocol | TCP,UDP,IPv4,IPv6,ICMP,NTP,DNS,HTTP,HTTPS,ARP,PPP,PPPoE,UP nP,SSH,DHCP,Telnet client,MQTT,PING TRACER |
| DHCP | Static and dynamic IP assignment,trunking |
SQM Queue Management |
Enable traffic shaping,better mixing (tair queuing),active queue management(AQM),and wire ordering on the specified network interface |
| DDNS | Dynamic DNS,supports morethan25service providers,other service providers can be configuredmanually |
| File/Network Backup | Configuration fles can be backed up.4/5G and DHCP/PPPOE/STATIC network backup,wired and 4/5G network automatic switching |
| Safe | |
| Firewall | nf tables |
| SYN-flood defense.port forwarding,traffic rules that define packet transmission policies between different zones. NAT rules thatallow fine-grained control of source IP to user outbound or forwardtraffic |
|
| VPN | |
| OpenVPN Client | Client for standard OpenVPN |
| OpenVPN Sever | OpenVPN servercan be configured with server address,port,client network segment and client push configuration |
| lpsecVPN Client | An Easy lpsec VPN Client |
| lpsecVPN Sever | lpsec VPN server can be configured with server address,client networksegment and key |
| PptpVPN Client | An Easy-to-Use Pptp VPN Client |
| L 2tpVPN ClientAn easy-to-use L 2tpVPN client | |
| System characteristics | ||
| CPU | Mediatek,MT7621,880MHz | |
| RAM | 1024Mbits DDR3(CPU built-in) | |
| FLASH storage Wireless |
128 Mbits SPI Flash | |
| Wireless mode | IEEE802.11a/b/g/n/ac/ax,Access Point(AP).Station (STA),Wireless Relay,Bridging | |
| WiFiencryption type | WPA2-PSK,WEP.WPA-EAP,WPA-PSK;AES-CCMP,TKIP,Auto Cipher modes | |
| SSID | SSID Stealth Mode and AccessControl Based on MACAddress | |
| Number of WiFi users | Up to 128 simultaneous connections | |
| Wireless rate | 2.4G:573Mbps(Max),5.8G:1201Mbps(Max) | |
| Wireless power Firmware/Configuration |
2.4G:21db(_2DB),5.8G:21dB(_2dB) | |
| WEB UI | Update firmware fromlocal files,check firmwareon server,configuration files,configure backup,restore | |
| FOTA | Update Firmware/Configuration from Server | |
| Firmware customization | ||
| Operating System | OpenWrt based Linux Os | |
| Supported languages | Busybox shell,Lua,C,C++ | |
| Development tools Power source |
Provide SDK package of buit-in environment (to be determined),and contact us to customize the development based on the requirement document |
|
| Connector | 4-pin 2.5mm industrial DC power socket,2.1mm*5.5mm inner pin DC005 interface | |
| Inputvoltage range | 7-35V DC,reverse polarity protected,surge protected>33VDC 10us Max | |
| Power Consumption<20W Max,<10WAverage,<3W Min | ||
| Physical interface(port,indicator,antenna,button,serial port,SIM) | |
| Ethernet 1xWan+4xLan RJ4510/100/100 Mbps,IEEE802.3,IEEE802.3u,IEEE802.3ab compliant,Auto MDI/MDIX | |
| Reset | Factory reset button(press and hold for 10 seconds to restore the factory value in the power-on state) |
| I ndicatorlight 2 network statusindicators,2 WiFi status indicators,1 system status indicator,1 powerindicator | |
| SIM card slot 2 SIM card slots (MicroSIM),18 V/3V standard push-type subscriber card interface,built-in 15 KVESD protection | |
| Powersource 2 connectors,4-pin 2.5mm industrial DC powersocket,2.1mm*5.5mm inner pin DC005 interface | |
| Antenna 13 standard SMA antenna interfaces:2*WiFi 2.4G,2&WiFi 5.8G,8*Cellular 4/5G(4 standard,4 optional),1*GPS(optional | |
| Serial port 6-pin EDG3.5mm inner pin industrial terminal socket,supporting RS485 and RS232 standard protocol serial port Physical specifications |
|
| Enclosure materia Aluminum housing with DIN rail mounting option with lug mounting option | |
| Size 149*126*46mm | |
| Weight 1000g | |
| Operating Environment | |
| Operatingtemperature -25C-70C | |
| Operating humidity 5%-95%,non-condensing | |
| Inlet protection class IP30 | |
