Ultimate Long Range WiFi Booster and Ceiling Extender

Description

N620 is a high-performance enterprise outdoor bridge product that can support 5G full band and use 802.11a/N/AN/AC technology. The unique nixie tube pairing technology can easily complete the pairing of point-to-point and point-to-multipoint (within 8 points) devices without computer configuration. Gigabit network interface, 5G 802.11an MIMO technology wireless processing speed up to 900Mbps. The power supply mode is flexible, supporting 24V POE network cable power supply and 12V 1A DC local power supply, and the network cable power supply distance can reach 80 meters (related to the network cable material). It adopts outdoor IP65 windproof, rainproof, dustproof and sunscreen protection grade shell design, which can easily adapt to various outdoor harsh environments. Built-in 14dBi dual-polarization plate antenna for quick and easy installation. It has the characteristics of high performance, high gain, high receiving sensitivity and high bandwidth, which greatly enhances the performance and stability of wireless transmission and is widely used in short-distance video transmission and data transmission.

Parameters

Main chip	MTK7620DA+7612E includes 64M RAM
Flash memory	8MB Flash
Size	2609037mm
Antenna	5.8G(802.11a/n/an/ac)2T2R
Antenna gain	Built-in dual-polarized high-gain 14dBi directional plate antenna
Speed	5.8g 900Mbps
Port	One 10/100/1000Mbps RJ45 port,one 10/100Mbps RJ45 connector
Power source	Support DC 12V1A,POE 24V1A non-standard power supply
Button	1Digitalswitch,short press the nixie tube to display the value plus one 1Reset button,press and hold for 5 seconds to restore factory settings 1*Dial switch,left and right switch master-slave mode
Transmission distance	2KM
Operating freguency band	802.11 a/n/an/AC:5.1GHz～5.8GHz(China)
Transmitting power	11a
	r6_24,r36,r48,	23
	r54	20
	11ACVHT20
	MCS0,MCS1_2,MCS3_4,MCS5,MCS6	23
	MCS7	23

	MCS8	20
	MCS9	20
	11ACVHT40
	MCS0,MCS1_2,MCS3_4,MCS5,MCS6	23

	MCS7		20
	MCS8		20
	MCS9		20
	11ACVHT80
	MCS0,MCS1_2,MCS3_4,MCS5,MCS6		23
	MCS7		20
	MCS8		20
	MCS9		20
EVM	11n
	MCs		Less than required (dB)
	Modulation	Coding rate	Less than required (dB)
	BPSK	1/2	-5
	QPSK	1/2	-10
	QPSK	3/4	-13
	16QAM	1/2	-16
	16QAM	3/4	-19
	64QAM	2/3	-22
	64QAM	3/4	-25
	64QAM	5/6	-28
	11ac
	MCS		Less than required (dB)

	Modulation		Coding rate
	BPSK		1/2	-5
	QPSK		1/2	10
	QPSK		3/4	-13
	160AM		1/2	16
	16QAM		3/4	-19
	64QAM		2/3	-22
	64QAM		3/4	-25
	64QAM		5/6	-27
	2560AM		3/4	-30
	2560AM		5/6	-32
EVM	5GHz	Symbo	Parameter		Rx(dBm)
	802.11a	Sif (OFDM)	1Rx chain	6Mbps	-88
				54Mb ps	-72
	802.11a C	802.11a cVHT20	1 Stream(1x1)	MCS0	-84
				MCS7	-67.5
				MCS8	-64
			2 Stream(2x2)	MCS0	-83
				MCS7	-66.5
				MCS8	-63

		802.11a cVHT40	1 Stream(1x1)	MCS0	-82
				MCS7	-65.5
				MCS9	-58.5
			2 Stream(2x2)	MCS0	-81
				MCS7	-64.5
				MCS9	-57.5
		802.11a cVHT80	1 Stream(1x1)	MCS0	-79
				MCS7	-62
				MCS9	-55.5
			2 Stream(2x2)	MCS0	-78
				MCS7	-61
				MCS9	-54.5
Support rate	802.11ac:6.5Mbps-867Mbps 802.11n:6.5Mbps and 300Mbps
Operating/stor age temperatures	-Temperature:-30℃-+55℃ (working).-40℃-+70℃(storage) Humidity(non-oondensing)10%-90%(operating).5%-95%(storage)

Waterproof grade	IP65
Signal indicators,4	Bridge Access Point:Output Power Indicator Below 25%(SIG1 always on),25%～50%(SIG1-SIG2 alwayson),50%～75%(SIG1-SIG3 always on). 75%～100%(SIG1-SIG4 are always on). Bridge client:connection signal strength indicator When the connection fails,the water lamp will be turned on.When the connection is sUccessful 0~-65dBm (SIG1-SIG4 is normally on).-66~-75 dBm (SIG1-SIG3 is normally on).-76~ -85dBm(SIG1-SIG2 is normally on).signalstrength below -86 dBm(SIGl is normally on)
LAN1	Gigabit network port status indicator:Flashes when wired data is transmitted,and goes out when wired data is disconnected.
	Wireless light:Fashes whenthe bridge is powered on and operating normally
d	Power indicator:it is normally on when the power is on,and it is off when thepower is off